Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Carrier Air Duct Cleaning in Glendale, CA
Carrier air duct cleaning in Glendale typically runs $450 to $900 for a full system, depending on home size and how much debris has settled in the ducts. We’re an independent Carrier service provider, not factory-authorized, and our crew works on Carrier equipment every week in Glendale’s older housing stock. That steady exposure to Carrier’s cabinet, coil, and duct configurations means we diagnose airside problems fast instead of guessing. Call (833) 589-9715 for a free estimate.
Why Glendale Residents Choose Us for Carrier Service
Most duct cleaning companies treat a Carrier system like any other box in the attic. It isn’t. A Carrier Infinity variable-speed air handler behaves differently than a builders’-grade air handler from the 1990s, and the ductwork attached to it in a 1940s Glendale bungalow carries different problems than flex runs in a newer tract home. We know the difference because we see it every week.
Onyx Duct Cleaning operates Rotobrush contact-cleaning systems and Nikro HEPA vacuum equipment, the same platforms restoration and abatement crews trust. That matters in Glendale, where pre-1960 galvanized ducts hold decades of fine silt, and where the La Tuna Fire left a soot burden that ordinary cleaning equipment recirculates rather than removes. Stan Merrick grew up in the Lankershim Arts District, studied HVAC systems at Los Angeles Valley College, and spent years working residential and light commercial service across the San Fernando Valley before starting Onyx in 2013. He built this company around source-removal cleaning and honest assessments, no upsells, no inflated scopes.
We use Carrier OEM filters, gaskets, and cabinet hardware where fitment matters, and quality aftermarket flex, mastic, and insulation on the duct side. We show you the system, not just the invoice.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Carrier Air Duct Cleaning Problems We Solve in Glendale
- High return-air static on Comfort and Performance systems. Glendale’s pre-1960 homes often have undersized returns, and Carrier Comfort and Performance furnaces respond poorly to that restriction. The blower starves, pulls dust past cabinet seams, and runs hot. We measure static, locate the restriction, and clean or reseal the return path rather than just vacuuming the registers.
- Leaking galvanized trunk lines on older WeatherMaker installs. Original galvanized ductwork from the 1980s and 1990s leaks at taped joints and boot collars. Conditioned air and foothill dust migrate through wall cavities instead of reaching the rooms. We seal what can be sealed and tell you plainly if a section needs replacement.
- Wildfire ash loading on Infinity blower wheels. A Carrier Infinity air handler is sensitive to a dirty evaporator coil and blower wheel. Once ash loads the wheel, airflow drops and the system faults on static pressure before you notice cooling loss. Our HEPA filtration pulls that fine material out without recirculating it through your house.
- Disconnected or sagging flex runs on Carrier plenums. Retrofit add-ons, common in Glendale homes that got central air late, disconnect or sag over time. The resulting leaks recirculate soot and dry-season dust through the return side. We inspect, reconnect, and reseal.
- Coil and blower contamination from foothill dust. Glendale’s hot, dry summers mean heavy cooling run hours, pulling in dust from the surrounding foothills and freeway corridors. That dust settles on Carrier coils and blower wheels, cutting airflow and efficiency. Full system cleaning addresses the coil, blower, and duct interior as one pathway.
Carrier Service in Glendale: What Local Conditions Mean for Your Equipment
The Rancho area (91207) and north Glendale (91202) carry a distinct ash burden from the 2017 La Tuna Fire and later wildfire seasons. Carrier return ducts there are often loaded with fine soot that a standard shop vac won’t capture. We run HEPA filtration and verify with video inspection before and after. Glendale’s 1920s to 1950s Spanish Colonial and Craftsman homes compound the problem. Many retain original gravity-furnace ductwork or have been retrofitted with jerry-rigged systems, so cleaning here frequently involves navigating asbestos-wrapped pipes and undersized returns that aren’t typical in newer suburbs. On a 1948 Spanish Colonial in Rancho, a homeowner’s Carrier Performance two-stage furnace was short-cycling and the return grille was caked with gray soot from the La Tuna Fire and later seasons. We scoped the return with video inspection, found the original galvanized trunk leaking at every taped joint behind the wall, HEPA-vacuumed the soot, then sealed the joints with mastic and reset the return static so the blower could breathe. Cooling came back to spec and the cabinet stopped pulling ash-laden air.
Carrier Models & Products We Service in Glendale
We service Carrier Infinity series variable-speed air handlers and modulating furnaces, Performance series two-stage furnaces and 14/15 SEER2 AC units, Comfort series single-stage 80% AFUE furnaces, and legacy WeatherMaker furnaces and builders’-grade air handlers from the 1980s and 1990s. The kind of product tells us what to expect inside the cabinet and inside the ducts attached to it. A variable-speed Infinity system needs a clean blower wheel to function; an older single-stage Comfort furnace forgives more, but the ductwork around it rarely does. We choose quality parts that fit your equipment, Carrier OEM where fitment matters, quality aftermarket on the duct side. A structurally sound Carrier cabinet is usually worth cleaning, sealing, and repairing. A rusted-through heat exchanger or cracked coil housing is a replace conversation, and we’ll say so plainly.
See the difference
Before
After
Before
After
Before
AfterCarrier Service Pricing in Glendale
Carrier air duct cleaning in Glendale typically costs $450 to $900 for a full system. Video inspection adds $100 to $200, duct sealing $250 to $500, and dryer vent cleaning $80 to $150. What drives the cost: square footage, number of stories, how much debris has accumulated, and whether the ducts are original galvanized or retrofitted flex. A free estimate includes a walkthrough of your system, a look at the return and supply paths, and a written scope before any work begins. No per-vent pricing. One flat price per system agreed before we start. Call (833) 589-9715 for an exact quote, estimates are free.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Carrier Air Duct Cleaning in Glendale
It often is. A smoke smell on the return side usually means soot or fine ash has accumulated in the return duct or on the blower wheel, and on an Infinity air handler that debris triggers static-pressure faults that cause short-cycling. We’d scope the return with video inspection, HEPA-vacuum the soot, and check the blower wheel before looking at anything else. Call (833) 589-9715 to schedule an inspection.
Yes. Original galvanized trunk lines leak at taped joints and boot collars, and sealing them with mastic and foil tape restores the pressure the blower needs. We test static before and after so you can see the change. If a section is deteriorated beyond sealing, we’ll show you the video and recommend replacement with an honest scope and price.
We work on both. Our crew handles modern Carrier Infinity and Performance systems with communicating controls as well as legacy WeatherMaker furnaces from the 1980s and 1990s. The airside cleaning and sealing work applies across the range, but Infinity systems demand more attention to blower-wheel loading and static pressure, and we account for that in how we clean and verify.
In Glendale, with hot dry summers and foothill dust plus freeway corridor particulates, most homes benefit from a full duct cleaning every 3 to 5 years. Homes in Rancho or north Glendale that caught La Tuna Fire ash may want it sooner. If you see dust returning to surfaces quickly after cleaning, or the cabinet is pulling air past seams, the return path needs sealing more than another cleaning. We can tell you which one applies to your system.
Usually yes. A sagging or disconnected flex run can be reconnected, supported, and sealed at the collar. We replace the run only when the inner liner is torn or the insulation is compromised. Either way, you’ll see the before and after on video. Call (833) 589-9715 for an exact quote, the estimate is free.
Service Areas Near Glendale
We serve Glendale and the surrounding San Fernando Valley and northeast Los Angeles areas, including North Hollywood, Burbank, Toluca Lake, Van Nuys, Sherman Oaks, and Woodland Hills.
Book Your Carrier Service in Glendale Today
Call (833) 589-9715. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Your estimate is free and the price is set per job by written estimate before any work begins. Clean air isn’t a luxury, it’s just what the system is supposed to deliver.
Written by Stan Merrick, Owner at Onyx Duct Cleaning, serving Glendale since 2013.